Customization: | Available |
---|---|
After-sales Service: | Online Service |
Warranty: | One Year |
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
---|---|
Support payments in USD |
Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Excellence Edition circular saw |
E80 technical data |
Cutting capacity | |
bar | 10-80mm |
Square steel | 10-65mm |
tube | 10-80mm |
Square pipe | 10-65mm |
Head spindle | |
Use TCT super hard circular saw blade | Φ300xT2.0x1.7 |
Pin hole and aperture | 4x φ 11xPCD63x φ32 mm |
Spindle motor | 7.5 (4P) kw/ 1500 rpm SERVO |
Spindle speed | 60-150 rpm |
Cut off feed mode | AC servo motor + ball screw | roller linear guide rail |
Main clamp mode | hydraulic | horizontal clamping and upper clamping each one |
Saw blade debris removal device | Passive round wire brush |
Gear gap compensation device | built-in anti-backlash mechanism |
Feed clamp | |
Feeding drive mode | AC servo motor + ball screw |
Feeding clamp mode | hydraulic | horizontal clamping |
Material front end removal length | 10-99 mm |
Material back end removal length | 80+ α ( αis not enough to cut a workpiece length )mm |
Single feed length | 6-850mm |
Automatic feeding device | |
The allowable material length | 3000~6000(optional customized material rack )mm |
Width of the storage area | 630mm |
Feeding mode | Pre-discharge | hydraulic lifting |
Hydraulic device | |
Hydraulic pump type | variable vane pump |
Hydraulic drive motor | 2.25 kw |
The rated pressure of the hydraulic system | 5.5 Mpa |
Hydraulic oil capacity | 90 L |
Sawing accuracy | |
Cut-off length error(mm) | ±0.12/100 |
Cutting surface error(mm) | ≤0.05/φ50 |
Cut off surface roughness | Ra1.6~3.2 |
Cut face perpendicularity | ⊥<=0.05/100mm |
Size and weight | |
Weight (machine + rack) | 2080+475kg |
Size(LXW) | 7100x2200 |
Other standard equipment | |
saw blade offset shockproof device | Tungsten carbide parallel block |
Separator | pneumatic | reciprocating |
lubrication system | thin oil lubrication |
Tool micro-lubrication system MQL | quasi-dry intermittent oil feeding |
Chip removal system | screw type |
Work light | LED| water and dust resistant |
pneumatic components brand | Airtac |
PLC | JUNCHUANG/XINKONG |
hydraulic solenoid valve | Northman/Senyo |
Optional device | |
Centrifugal oil mist recovery machine | multi-stage filtration, energy saving and environmental protection |
Cluster feeding device | bundle feeding, long material cutting preferred |
Hydraulic wire brush | active removal of debris |
Long material undertaking device (discharge device) | a variety of flexible options, can be equipped with robot discharge material |
Spare parts | Brand |
Main motor | Riding |
Main motor inverter | Riding |
Reducer box bearing | KOYO,IKO,TWB |
Ball screw | feishu |
Linear guide | Kaite |
Servo motor and amplifier(feed) | Weichuang/DIVISION |
PLC | Jun chuang/weichuang |
Touch screen | Jun chuang/weichuang |
Low pressure vital parts | Schneider |
Photoelectric switch | DADIguangmu |
Oil pump | senyou |
Oil pump motor | senyou |
Solenoid valve | Northman |
Thin oil lubricates | Jinhe |
Grease lubricates | Jinhe |
Oil gas spray | Jinhe |
Items: | Φ80 |
Recommended speed: | 130rpm/min |
Recommended single-tooth feed amount: |
0.06-0.12mm/z |
Actual feed speed: | 7.8mm/s-15.6mm/s |
Single cut cycle speed: |
8s-13.2s/pc (includes clamping, feeding, sawing etc. action) |
Output per shift (8H) : |
2100-3550 pieces/shift |
Saw disc spec. | Ф300*32*2*T60 |
Sawing life | ≈35m² |
Factory show: ![]() ![]() ![]() Some of the fairs ![]()
|
||